搜产品
搜企业
客服电话:13631151688
广告
Industry standard in China have given determine: has the cutting device, the device, bending device, the bending device at least, the head of spindle rotating three-axis motion of linear movement and clip, and use numerical control system control pipe cutting, bending, end equipment according to bend processing center.
3 bend processing center terms and definitions
3.1 bend processing Center Bends Machining Center
With cutting device, the device, bending device, including bending device at least, the head of spindle rotating three-axis motion of linear movement and clip, and use numerical control system control pipe cutting, bending, end equipment according to bend processing center.
3.2 preliminary feeding Pre - bean
After bending a bend, can restore smoothly bend arm feeding distance.
3.3 Tooling demoulding distance offset
Material and process of the mould, prevent the workpiece and its dies friction or interference, the movement of the distance between die and workpiece.
3.4 layer Height Stack Height
Adjacent two layers of mold arc groove center distance.
3.5 automatic feeding Autoloading
Through a dedicated device will automatically loaded to bend mold artifacts.
3.6 automatic blanking Autounloading
Through a dedicated device will automatically be removed from the mold and the workpiece to unload.
3.7 automatic Auto changing of the mold tooling Changer
Automatically by the machine to complete the location of the die change.
3.8 Safety Safety Zone
In the moving parts travel in some areas, the moving parts in these area can only be run in a safe speed.
Above is bend processing center of terms and definitions.